CURABITUR ALIQUET QUAM POSUERE
Welcome Aboard Us!
Subscribe to our emails for the latest industry updates and special offers.
Will be used in accordance with our Privay Policy
Proudcts
Seamless Steel Pipe
11 products
Welded Steel Pipe
7 products
Stainless Steel Pipe
7 products
OCTG and Tubing
5 products
Pipe Fittings and Flange
12 products
Valves
7 products
Hollow Section
3 products
Steel Profile
9 products
Cladded Pipe
1 product
Subsea Fitting
4 products
Gate Valve
Gate valve is an opening and closing part of the gate plate, the direction of motion of the gate plate is perpendicular to the direction of the fluid, the gate valve can only be fully opened and fully closed, can not be adjusted and throttled. Gate valves are sealed by contact between the seat and the gate plate, and the sealing surface is usually surfacing with metal material to increase wear resistance. There are rigid gate and elastic gate, according to the different gate, gate valve is divided into rigid gate valve and elastic gate valve.
Control Valve
A control valve is a valve used to control fluid flow by varying the size of the flow passage as directed by a signal from a controller. This enables the direct control of flow rate and the consequential control of process quantities such as pressure, temperature, and liquid level.
Check Valve
Check valves and non-return valves are fittings for preventing backflow in pipelines. Due to their simple design, short overall lengths are possible. Check valves offer an optimum solution for large nominal widths, e.g. where intermediate flange connections are required or desired.
Butterfly Valve
Butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The “butterfly” is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.
Ball Valve
Ball valve is a fluid flow control device that uses a hollow, porous, and oscillating ball to control the fluid flowing through it. When the hole in the center of the ball is aligned with the inflow port, it is in the open state, and when it is swung 90 degrees by the valve handle, the hole is closed so that the fluid stops flowing. When opened, the handle remains flush with the flow direction, while when closed, the handle is perpendicular to the flow direction, facilitating visual confirmation of the valve’s status. The 1/4 rotation of the closed position can be either clockwise or counterclockwise.
Steel Weldolet Pipe Fittings
Weldolet is the most common among all pipe olet. It is ideal for high pressure weight application, and is welded onto the outlet of the run pipe. The end are bevelled to facilitate this process, and therefore the weldolet is consider a butt weld fitting.
Steel Pipe Unions Fittings, Easy Connection
Steel pipe unions consist of three parts that a nut, a female end and a male end. There are two types that socket weld union and threaded ( screwed ) union. Material for supply range: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel and Cooper Nickel.
Steel Threadolets, Branch Pipe Fittings
Threadolet is one of integrally Reinforced Connection Branch, which provides an outlet from a larger pipe to a smaller one. Outlet connects onto main pipe by welding, and for branches, it has a female threaded connection to mate.
Steel Tee Pipe Fittings
Steel pipe tee has three branches that can change fluid direction. It has T-shaped or Y-shaped, and include Equal Tee and Reducing Tee (Reducer Tee). Steel tee is widely used in pipe networks for convey liquids and gases.
Steel Pipe Reducer
A steel pipe reducer is a component used in the pipelines to reduce its size from large to small bore in accordance to the inner diameter. The length of the reduction here is equal to an average of the smaller and larger pipe diameters. Here, the reducer can be used as a diffuser or a nozzle.
Steel Threaded and Welded Pipe Nipple
steel nipples are used for threaded connection between industrial fittings and pipe fittings and are available in various grades, diameters and threads. In its most basic form, the stainless nipple is a short threaded fitting with male threads at both ends for connecting other fittings.
Steel Gaskets – Flat, Corrugated, Spiral Wound, and Ring Gaskets
A metal gasket is a sealing component designed to prevent leakage between two surfaces in industrial applications. Typically made of metal, these gaskets, shims, or washers are engineered to withstand a wide range of operating conditions, including high temperatures, pressures, and exposure to corrosive substances. Metal gaskets are critical in ensuring the integrity of connections in systems such as pipelines, flanges, heat exchangers, and pressure vessels.
The construction of a metal gasket typically involves a solid metal core, which provides strength and stability, surrounded by layers of flexible material that contribute resilience.
This combination allows metal gaskets to effectively create a seal between two surfaces, preventing the escape of fluids or gasses.
wn Flange for Steel Pipes
Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.
Seamless Steel Elbow
Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.
BW Steel Cap Pipe Fittings
Steel Pipe Cap is also called Steel Plug, it usually welded to the pipe end or mounted on the external thread of the pipe end to cover the pipe fittings. To close the pipeline so the function is the same as the pipe plug.
Bolt Nuts for Carbon Steel Pipes
Bolts and nuts are hardware fasteners commonly used in construction, manufacturing, automotive, and various other industries. They are used to join two or more components together securely.
